The mobile and light inverters of the CUTi series are suitable for manual cutting in the range between 0.5 and 50 mm. By using air as plasma gas, it is possible to cut mild steel, stainless steel, aluminium, brass, copper and other electrically conductive materials. Equipped with air-cooled torches the units can also be used for bevel cutting and plasma gouging with diverse accessories.
The robust units of the CUTLINE series cut all electrically conductive materials with a thickness between 1 and 40 mm using air as plasma gas. The simple, step-switched power sources are equipped with liquid-cooled torches that reduce the consumption of compressed air and consumables considerably.
Thanks to the ergonomic handle design and the low weight of the KjellCut plasma torches work is easy. In addition to the convenient operation, safety is also of prime importance here. A switch-on protection prevents the unwanted ignition of the plasma arc.
Contact cap
Spacer spring
Bevelling cap
Wheel guide
Bevel cutting device
Circle cutting device
Long consumables
Straight, profile & contour cutting, also with templates
Piercing & hole cutting
Bevel cutting
Plasma gouging
Specifications |
Description |
Description |
Power Source | CUTi 35 | - |
Mains voltage | 1x 230 V | - |
Cutting current | 35 A (40 % duty cycle) | - |
Cutting current | 28 A (60 % duty cycle) | - |
Cutting current | 22 A (100 % duty cycle) | - |
Cutting range | recommended: 10 mm | - |
Cutting range | maximal: 12 mm | - |
Dimensions (L x W x H) | 480 x 150 x 225 mm | - |
Weight | 10 kg | - |
Plasma torch | KjellCut 35C | - |
{{item.review}}
{{item.user_info.firstname}} {{item.user_info.lastname}}, {{item.user_info.designation}}
{{data.user_info.firstname}}{{data.user_info.lastname}} , {{data.user_info.designation}}
{{data.answer}}